2.1 Troubleshooting Introduction
Chapter 2 describes how to determine if a Field Replaceable Unit (FRU) in the computer is
causing the computer to malfunction. The FRUs covered are:
The Diagnostics Disk operations are described in Chapter 3. Detailed replacement
procedures are given in Chapter 4.
The following tools are necessary for implementing the troubleshooting procedures:
1. Phillips screwdriver (3.5 mm)
2. Multimeter
3. External monitor
4. USB compatible keyboard
5. Multimedia sound system with line-in and line-out ports
6. Headphones
7. USB test module and USB cable
8. MIC module and MIC line
9. Audio loop back
10. USB3.0 HDD
11. HDMI