4 Replacement Procedures Error! No text of specified style in document. Error! No text of
specified style in document.
4-16 Metis 10F/10FG Maintenance Manual [CONFIDENTIAL]
6. Remove the HDD BRK and aluminum foil.
Figure 4-6 Removing the HDD aluminum
CAUTION: Do not apply pressure to the top or bottom of the drive.
Installing the HDD
Install the HDD according to the following procedures and Figure 4-7.
CAUTION: To avoid damage, always hold the HDD only by its sides.
1. Place the HDD aluminum foil onto the HDD.
2. Place the HDD BRK onto the HDD left and right.
To Next Page
Loading...
