Error! No text of specified style in document. Error! No text of specified style in document. 4
Replacement Procedures
[CONFIDENTIAL] Metis 10F/10FG Maintenance Manual 4-15
Figure 4-5 Removing the HDD from the HDD bay
NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble or
replace the HDD pack only if it fails.
4. Place the HDD on a flat surface such as a desk.
5. Remove the four M3×3 screws securing the left and right HDD BRK.
To Next Page
Loading...
