4 Replacement Procedures Error! No text of specified style in document. Error! No text of
specified style in document.
4-18 Metis 10F/10FG Maintenance Manual [CONFIDENTIAL]
4.5 SSD Card
Removing the SSD Card
Remove the SSD card according to the following procedures and Figure 4-8.
1. Remove the two M2×3 screws securing the SSD card, the SSD card pops up automatically.
2. Remove the SSD card at an angle of 45 degree.
Figure 4-8 Removing the SSD Card
Installing the SSD Card
Install the SSD card according to the following procedures:
1. Insert the SSD card into the connector on the motherboard at an angle of 45 degree.
2. Press the SSD card down and secure it with two M2×3 screws.
To Next Page
Loading...
