4 Replacement Procedures Error! No text of specified style in document. Error! No text of
specified style in document.
4-38 Metis 10F/10FG Maintenance Manual [CONFIDENTIAL]
4.15 LCD Bezel
Removing the LCD Bezel Assembly
Remove the LCD bezel according to the following procedures and Figure 4-20.
1. Remove the two screw rubbers on the LCD bezel.
2. Remove the two M2.5×4 screws as shown in Figure 4-20.
Figure 4-20 Removing the LCD Bezel
3. Pry up the left and right sides of the LCD bezel from the inner edges.
To Next Page
Loading...
