Error! No text of specified style in document. Error! No text of specified style in document. 4
Replacement Procedures
[CONFIDENTIAL] Metis 10F/10FG Maintenance Manual 4-29
4.11 Motherboard
Removing the Motherboard
Remove the motherboard according to the following procedures and Figure 4-15.
1. Pull out the DC-IN connector from the routing channel.
2. Remove four M2.5×6 screws securing the motherboard.
3. Disconnect the LVDS cable from the connector on the motherboard.
4. Gently lift left side firstly, then lift the right edge of the motherboard to free the port
connectors, and remove the motherboard from the logic lower assembly.
Figure 4-15 Removing the motherboard from the logic lower assembly
To Next Page
Loading...
