4 Replacement Procedures Error! No text of specified style in document. Error! No text of
specified style in document.
4-30 Metis 10F/10FG Maintenance Manual [CONFIDENTIAL]
Installing the Motherboard
Install the motherboard according to the following procedures:
1. Align the ports on the right side of the motherboard to the corresponding openings in the
logic lower assembly, and seat the motherboard in the logic lower assembly.
2. Slightly lift the left side of the motherboard. Seat the DC-IN connector in the DC_IN
trough and route the cable from right to left in the routing channel.
3. Connect the LVDS cable to the connector on the motherboard.
4. Secure the motherboard with four M2.5×6 screws.
To Next Page
Loading...
