4 Replacement Procedures Error! No text of specified style in document. Error! No text of
specified style in document.
4-14 Metis 10F/10FG Maintenance Manual [CONFIDENTIAL]
For H7 model: Loosen the M2.5×5 half teeth screw securing the door(mark 1 as shown in
figure), and pry up the door by the way shown if figure to release the hooks away, handle the
door at mark 3 shown in figure then pull out the door by rotating at 45 degree.
H7 model
Figure 4-4 Removing the screws securing the HDD door
2. Remove the one M2.5×6 screw securing the HDD to the logic lower.
3. Remove the HDD by pulling the tab attached to the HDD.
To Next Page
Loading...
