Error! No text of specified style in document. Error! No text of specified style in document. 4
Replacement Procedures
[CONFIDENTIAL] Metis 10F/10FG Maintenance Manual 4-33
1. Reapply Shinetsu 7762 grease on the CPU thermal module as shown in Figure 4-17. If you
use a new CPU thermal module, remove the release papers on the thermal pads first.
DIS model
UMA model
Figure 4-17 Reapplying the thermal grease on the thermal module
2. Place the thermal module in the correct position on the motherboard.
To Next Page
Loading...
