Toshiba Strata CIX IP5000-Series - To Use a One Touch Button; Setting;Changing a Personal Speed Dial Code

User Programming
One Touch Buttons
Strata CIX IP5000-series Telephone User Guide 109
Example of Special Character Usage
To create a One Touch for Park and Page under one button, program the following
sequence under the One Touch button.

CNF #33*** FB1 #30
CNF – puts the caller on hold and gets new dial tone.
#33 – code to park call
**
– this special character outputs a single * which will select an available orbit and
display the selected orbit on the phone.
*
– This special character is a Stop. The dial string pauses and enables the user
to view the selected orbit on the display. The dial string will
restart from this point
when the One Touch button is pressed again.
FB1 – gets new dial tone on the PDN
#30 – code for All Call Page which allows the user to page the location of the orbited
call.
To Use a One Touch Button
 Press the One Touch button.
Setting/Changing a Personal Speed Dial Code
See “Storing a System/Station Speed Dial Number” on page 82.
Table 14 Special Characters
Entry Meaning
*
+
Indicates “stop.” The One Touch button blinks rapidly and stops the delivery of
the remaining digits in the string until it is pressed again. Multiple “stops” can be
programmed into one string.
*

(1~9)
Pause (1~9) seconds. If you need to pause longer than nine seconds, enter
additional pause escape sequences. For example, to insert a 17-second pause,
enter
*9*8. The display of a pause in the Speed Dial Number shows a “P”
without specifying the duration. In this example, you would see “PP.”
** *
*
##