SoftIPT
Configuring SoftIPT 3.0
Strata CIX IP5000-series Telephone User Guide 35
Configuring SoftIPT 3.0
Step 1: Configure the SoftIPT
1. After you have installed SoftIPT, double-click the SoftIPT icon on the desktop. The
SoftIPT Configuration window opens.
Important! Important! See the illustration below. You will need to enter items A-E to
configure SoftIPT. Check with your Telephone System Administrator to
make sure that you have this information. After entering this information,
print the screen for future reference.
Figure 1 SoftIPT Configurations
To Next Page
Loading...
