To access the Sound Setting screens
From the IP Configurations menu, choose the Sound soft key.
Note There are three screens for Sound Settings (shown below). Use the and
soft keys to move from one screen to another.
The general operation on the Sound Settings screens is as follows:
• To view details of an item displayed on the screens above, press the soft key that
corresponds to that item.
• Press the Set soft key to rewrite the NV-RAM data if any setting of a minor item is
changed.
• Press the CANCEL soft key to cancel all the intended setting changes in the minor
items and to go to the IP Configurations Screen without rewriting the NV-RAM
data.
To Next Page
Loading...
