Feature Operations
Speed Dial
Strata CIX IP5000-series Telephone User Guide 81
Speed Dial
Speed Dial (SD) enables you to dial a sequence of up to 32 digits with a shorter code.
Dial sequences can include telephone numbers, authorisation codes, passwords feature
activation codes and pauses. Speed Dial may be used to originate a call or invoked after a
call is established. There are two types of Speed Dial:
• System SD – All telephones in your system can share a list of up to 800 System Speed
Dial numbers under the exclusive control of the System Administrator. In some cases,
System Speed Dial enables you to reach numbers that you would not be allowed to
dial directly from your telephone.
• Station SD – Your System Administrator allocates a block of up to 100 personal SD
numbers (10 per telephone). You have exclusive use of them and you can create and
change them from your own telephone.If you have a 9-Line LCD telephone, you can
assign names to your station SD numbers to appear on the Personal SD Directory
display (see your System Administrator or use the procedure for “Storing Personal
Speed Dial Names” on page 84.)
To use personal Speed Dial
1. See your System Administrator to check how many personal Speed Dial numbers are
allocated to your telephone and if you have Speed Dial capabilities enabled on your
telephone.
2. Setup / Store your personal Speed Dial numbers.
3. Assign names to personal Speed Dial numbers (on supported models).
Making a Call Using Speed Dial
There are two ways to begin a Speed Dial Call.
1. Press on a IP5000-series digital telephone
...or press the
*
button on any telephone.
2. Dial the Station or System Speed Dial Number. Station Speed Dial numbers occupy
numbers 100~199. System Speed Dial numbers occupy numbers 200~999.
To Next Page
Loading...
