Administrator Programming
IP5131D-SDL Settings
128 Strata CIX IP5000-series Telephone User Guide
Network Settings
To access the Network Setting screens
1. Press +
3+6+9 (simultaneously), choose the Network soft key.
2. From the IP Configurations screen, there are three screens for Network Settings
(shown below). Use the “
” and “” soft keys to move from one screen to
another.
The general operation on the Network Settings screens is as follows:
• To view details of an item displayed on the screens above, press the soft key that
corresponds to that item.
• Press the Set soft key to rewrite the NV-RAM data if any setting of a minor item is
changed. The screen will move to the Resetting Selection Screen. (The Resetting
Selection Screen will be described in detail later.)
• Press the Cancel soft key to cancel all the intended setting changes in the minor
items and to go to the IP Configurations Screen without rewriting the NV-RAM
data.
To Next Page
Loading...
