Administrator Programming
IP5131D-SDL Settings
Strata CIX IP5000-series Telephone User Guide 129
DHCP Server Settings
1. Press +
3+6+9 (simultaneously).
2. From the IP Configurations screen, choose Network >
DHCP. The DHCP Mode screen displays.
The current default set is underlined.
3. Press the On or Off soft keys to change the set value.
4. Press the Set soft key to accept the change.
...or press the Cancel soft key to cancel the change.
Notes
• The Network Setting Screen displays when you press Set or
Cancel.
• DHCP is underlined in the display if you changed the setting.
• If the DHCP setting is changed from On to Off, then the “IP Addr” setting on the
Network Setting screen will be initialised to the initial value.
• The IP5131D-SDL gets its IP address, Subnet mask, Default Gateway, DNS server
address from DHCP server.
To Next Page
Loading...
