Administrator Programming
IP5131D-SDL Settings
Strata CIX IP5000-series Telephone User Guide 137
GRQ Port Number
1. From IP Configurations > Advanced > GRQ Port. The
current GRQ Port Number displays (shown right).
2. Enter the New number. (Maximum 5 digits).
3. Press the Set soft key to accept the change
...or press the Cancel soft key to cancel the change and
go to the Advanced Setting screen.
Note For other notes, refer to “Station ID” on page 132.
RRQ Port Number
1. From IP Configurations > Advanced > RRQ Port. The
current RRQ Port Number displays (shown right).
2. Enter the New number. (Maximum 5 digits).
3. Press the Set soft key to accept the change
...or press the Cancel soft key to cancel the change and go
to the Network Setting screen.
Note For other notes, refer to “Station ID” on page 132.
Application Server Address
1. From IP Configurations > Advanced > AP Addr. The
current Application Server Addr screen displays (shown
right).
Note The Application Server Address can be an IP Address
or a URL (alphanumeric). See “Dial Pad
Alphanumeric Characters” on page 138 to enter the
URL.
2. Follow the steps “To change settings on the screen” on
page 130. Also see Table 19 on Page 138 for additional
information.
To Next Page
Loading...
