4.8 Optical drive 4 Replacement Procedures
4. Remove the following screws and pushing plate.
• M2×2.7C S-THIN HEAD screw ×2
5. Remove the following screw and mounting plate.
• M2×3C BIND screw ×1
M2×3C BIND
Mounting plate
M2×2.7C S-THIN HEAD
Pushing plate
Figure 4-13 Disassembling the optical drive
TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573) [CONFIDENTIAL] 4-23
To Next Page
Loading...
