– 109 –
8.2 TR48DIOC
The TR48DIOC output specifications are Source type.
Because the input specifications use bidirectional photocouplers in the input circuit,
the selection of INCOM* enables switching between Source type and Sink type.
8.2.1 Connecting the Extension Input Signal Cable
The connection of the extension input signal cable uses the connector XM3A-3721
(plug type) and XM2S-3711 (connector cover) supplied with the TR48DIOC. The
TR48DIOC inputs (DI_101 to DI_128 (Station 0) and DI_133 to DI_160 (Station 1),
are connected to the connector INPUT on the module panel.
To Next Page
Loading...
