DUST-PROOF/WATER-PROOF TYPE INDUSTRIAL ROBOT SPECIFICATIONS MANUAL
!
DANGER
• Do not place the robot or controller near combustible. Doing so could lead
to fires if it ignites due to a fault, etc.
!
WARNING
• Do not use the robot in environments exceeding the protection class for
water or dust. This can cause the ingress of water or dust, resulting in a
shorter robot lifespan, reduced operating accuracy, or malfunctions.
• The robot controller does not have a dust-proof/drip-proof design.
• Please contact Toshiba Machine for details about water protection
performance for non-water substances.
• Be sure to always perform an air purge. If an air purge is not performed,
dust and water protection performance will be reduced.
• The dust-proof/water-proof specifications do not provide an explosion-proof
structure.
STE 85338
– 16 –
To Next Page
Loading...
