Toshiba TV1000H-WP - Maintenance; Maintenance Items

DUST-PROOF/WATER-PROOF TYPE INDUSTRIAL ROBOT SPECIFICATIONS MANUAL
STE 85338
– 20 –
5. Maintenance
5.1 Maintenance Items
The inspection items for the dust-proof/water-proof specifications are shown below.
Inspection
item
Location of
inspection
Inspection
Daily
inspection
2-year
inspection
Each
packing
Each cover
Visual inspection for cracks and
other defects in packing
Listening for abnormal leaks of
purge air
○
Replacement
(Recommended)
The other structure is identical to the standard machine. For information about the
maintenance schedule, maintenance procedures, and inspection details, refer to the
separate “TV800/TV1000/TV1000H Instruction Manual: Maintenance”.
!
CAUTION
• The customer must never replace parts other than those specified in this
manual. This can cause reduced dust-proof/water-proof performance, faults, or
accidents.
• Maintenance parts other than those specified in this manual shall be replaced
by the Toshiba Machine service staff. Toshiba Machine will not be liable for any
faults or accidents that occur due to replacement by the customer.
!
DANGER
• Before moving near the robot to start maintenance or inspection, be sure to
turn off the main power switch on the controller.