DUST-PROOF/WATER-PROOF TYPE INDUSTRIAL ROBOT SPECIFICATIONS MANUAL
STE 85338
– 29 –
O-ring
Wiring/piping panel
5.3.7 Wiring/Piping Panel
The wiring/piping panel is secured to arm 2 (2) with six hexagon socket head bolts
(M4x10) with an O-ring inserted in between.
When mounting the panel, be careful that no cables and O-ring get pinched in
between.
Fig. 5.8 Wiring/Piping Panel
!
CAUTION
• Be sure to mount the O-ring.
Failure to apply O-ring will result in reduced dust-proof and water-proof
capabilities, causing water and powdery dust to enter.
• Once removed, the O-ring cannot be reused. Be sure to replace with the new
one.
• Apply an appropriate amount of grease when mounting the O-ring.
* The internal cables are
omitted from the
illustration.
To Next Page
Loading...
