DUST-PROOF/WATER-PROOF TYPE INDUSTRIAL ROBOT SPECIFICATIONS MANUAL
Preface
This manual describes the specifications of the TV1000H-WP dust-proof/water-proof type
industrial robot.
This manual contains the sections relating to the TV1000H-WP dust-proof/water-proof
specifications. Before using the robot, be sure to thoroughly read the separate
TV800/TV1000/TV1000H Instruction Manual for the regular operating procedures.
This manual is essential for maintaining robot performance over an extended period of
time, preventing a breakdown, and improving safety.
Before actually starting operation, please read through this manual once and set up a
maintenance plan beforehand.
Warranty
The warranty is the same as that described in the TV800/TV1000/TV1000H Instruction
Manual: Maintenance with the addition of the items below exclusively for the
dust-proof/water-proof specifications.
Warranty exceptions
1) Faults that occur when using the robot in environments exceeding the protection class
for water or dust
Precautions on Safety
Important information on the robot and controller is noted in the instruction manual to
prevent injury to the user and persons nearby, prevent damage to assets and to ensure
correct use.
Make sure that the following details (indications and symbols) are well understood before
reading this manual. Always observe the information that is noted.
STE 85338
– 2 –
To Next Page
Loading...
