Toyota 2GR-FE - Page 737

FU–24
2GR-FE FUEL – FUEL PRESSURE PULSATION DAMPER
FU
2. INSTALL INTAKE AIR SURGE TANK ASSEMBLY (See
page FU-18)
3. INSTALL AIR CLEANER CAP SUB-ASSEMBLY (See
page ES-506)
4. ADD ENGINE COOLANT (See page CO-6)
5. CONNECT CABLE TO NEGATIVE BATTERY
TERMINAL
6. CHECK FOR ENGINE COOLANT LEAKS (See page
CO-1)
7. CHECK FOR FUEL LEAKS (See page FU-8)
8. INSTALL COWL TOP PANEL OUTER SUB-
ASSEMBLY (See page ES-485)
9. INSTALL WINDSHIELD WIPER MOTOR AND LINK
ASSEMBLY (See page WW-14)
10. INSTALL COWL TOP VENTILATOR LOUVER SUB-
ASSEMBLY (See page WW-15)
11. INSTALL FRONT FENDER TO COWL SIDE SEAL RH
(See page WW-15)
12. REMOVE FRONT FENDER TO COWL SIDE SEAL LH
(See page WW-15)
13. INSTALL FRONT WIPER ARM AND BLADE
ASSEMBLY LH (See page WW-15)
14. INSTALL FRONT WIPER ARM AND BLADE
ASSEMBLY RH (See page WW-16)
15. INSTALL V-BANK COVER SUB-ASSEMBLY (See
page EM-52)