71
Chapter 13
Network Security
Now you can block or allow specific client devices to access your network (via wired or
wireless) using the Allow List or Deny List.
13. 3. IP & MAC Binding
IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind
network device’s IP address to its MAC address. This will prevent ARP Spoofing and
other ARP attacks by denying network access to an device with matching IP address in
the Binding list, but unrecognized MAC address.
I want to:
Prevent ARP spoofing and ARP attacks.
How can I do that?
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced > Security > IP & MAC Binding.
3. Enable IP & MAC Binding.
4. Bind your device(s) according to your need.
1 ) Click + Add in the Binding List section.
2 ) To bind the connected devices, click VIEW CONNECTED DEVICES and select
the device you want to bind. The MAC Address and IP Address fields will be
automatically filled in. To bind the unconnected devices, enter the MAC Address
and IP Address that you want to bind.
To Next Page
Loading...
