62
Chapter 9
Manage Your Controller
9. 9. CWMP Settings
The Controller supports CWMP (CPE WAN Management Protocol), also called TR-
069. This collects information, performs diagnostics and configures the devices
automatically via ACS (Auto-Configuration Server).
1. Visit
http://tplinkwifi.net, and log in with the password you set for the Controller.
2. Go to Settings > System Tools > CWMP Settings.
• CWMP: Enable or disable the CWMP (CPE WAN Management Protocol) function.
•
Inform: Enable or disable the function of sending an inform message to the ACS (Auto
Configuration Server) periodically.
•
Inform Interval: Set the time interval in seconds when the Inform message will be sent
to the ACS.
•
ACS URL: Set the web address of the ACS which is provided by your ISP.
•
ACS Username/Password: Set the username/password to log in to the ACS server.
•
Interface used by TR-069 client: Select which interface to be used by the TR-069
client.
•
Display SOAP messages on serial console: Enable or disable this function.
To Next Page
Loading...
