63
Chapter 9
Manage Your Controller
• Connection Request Authentication: Select this checkbox to enable authentication
for the connection request.
•
Username/Password: Set the username/password for the ACS server to log in to the
router.
•
Path: Enter the path for the ACS server to log in to the router.
•
Port: Enter the port that connects to the ACS server.
•
URL: Enter the URL that connects to the ACS server.
•
Get RPC Methods: Click this button to get the methods to support CWMP.
Click
Save to make the settings effective.
9. 10. Monitor the Internet Traffic Statistics
The Traffic Statistics page displays the traffic usage of all devices in the past 10
minutes/24 hours/7 days.
1. Visit
http://tplinkwifi.net, and log in with the password you set for the Controller.
2. Go to Advanced > System Tools > Statistics.
3. Turn on Enable Traffic Statistics to enable traffic statistics function, you can view
the total number of packets and bytes received and transmitted by the router within
the selected
Statistics Interval. This function is disabled by default.
4. You can refer to Traffic Statistics List for the detailed information about the traffic
usage of all devices.
To Next Page
Loading...
