14
Chapter 4
Set Up Internet Connection
4. 1. Use Quick Setup Wizard
The Quick Setup wizard will guide you to set up your Controller.
Your Controller provide two working modes,
Router Mode and AP Mode. You will be
asked to choose a working mode at the first login.
4. 1. 1. Set Your Controller Working in Router Mode
Follow the steps below to set up your Controller.
1. Visit
http://tplinkwifi.net, and log in with the password you set for the Controller.
2. Click
Quick Setup on the top of the page and start the configuration by choosing
Router Mode and click Next.
Note: If you want to change the operation mode after the Quick Setup is completed, you can go to Settings > Operation
Mode. The Controller will reboot when you change the operation mode.
3. Configure the basic internet connection, you can follow the instructions below to
continue the configuration, and then click
Next.
To Next Page
Loading...
