EasyManuals Logo

TP-Link TD-W8980 User Manual

TP-Link TD-W8980
117 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
7
Chapter 2. Connecting the Modem Router
2.1 System Requirements
¾ Broadband Internet Access Service (DSL/Cable/Ethernet).
¾ PCs with a working Ethernet Adapter and an Ethernet cable with RJ45 connectors.
¾ TCP/IP protocol on each PC.
¾ Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari.
2.2 Installation Environment Requirements
¾ The Product should not be located where it will be exposed to moisture or excessive heat.
¾ Place the Router in a location where it can be connected to the various devices as well as to a
power source.
¾ Make sure the cables and power cord are safely placed out of the way so they do not create a
tripping hazard.
¾ The Router can be placed on a shelf or desktop.
¾ Keep away from the strong electromagnetic radiation and the device of electromagnetic
sensitive.
Figure 2-1 Wall-mount install

Table of Contents

Other manuals for TP-Link TD-W8980

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link TD-W8980 and is the answer not in the manual?

TP-Link TD-W8980 Specifications

General IconGeneral
VPN supportPPTP, L2TP
Ethernet LANYes
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
VPN tunnels quantity10
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11a, 802.11b, 802.11g
Top Wi-Fi standardWi-Fi 4 (802.11n)
WLAN data transfer rate (max)300 Mbit/s
Input current1.5 A
Rack mountingNo
Frequency band2.4 & 5 GHz
USB ports quantity2
RJ-11 ports quantity1
Ethernet LAN (RJ-45) ports4
DHCP client-
Supported network protocolsATM/PPP
Antennas quantity5
Antenna connector typeRP-SMA
Security algorithms128-bit AES, 128-bit WEP, 256-bit AES, 3DES, 64-bit WEP, DES, WPA, WPA-PSK, WPA2, WPA2-PSK
Authentication methodMD5, SHA-1
CertificationCE, FCC, RoHS
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 90 %
Cables includedLAN (RJ-45), Phone (RJ-11)
Output voltage12 V
Weight and Dimensions IconWeight and Dimensions
Depth160.6 mm
Width243 mm
Height32.5 mm
Weight- g

Related product manuals