Error! AutoText entry not defined.
Error! AutoText entry not defined. User Guide
6
2.3 The Side Panel
Figure 2-3
WLAN: Press this button to enable or disable the Wireless LAN interface.
QSS: This button is used for QSS setting. For detailed information, please refer to 4.2.3.6
QSS.
ON/OFF: The switch for the power.
2.4 Installation Environment
The Product should not be located where it will be exposed to moisture or excessive heat.
Place the Router in a location where it can be connected to the various devices as well as to a
power source.
Make sure the cables and power cord are safely placed out of the way so they do not create a
tripping hazard.
The Router can be placed on a shelf or desktop.
Keep away from the strong electromagnetic radiation and the device of electromagnetic
sensitive.
2.5 Connecting the Modem Router
Back to LED Explanation
To Next Page
Loading...
