Error! AutoText entry not defined.
Error! AutoText entry not defined. User Guide
31
Note:
After saving your configuration, you need to click the Save button on the left panel to make your
configuration take effect.
4.2.3.2 MSSID
Choose “Setup→WLAN→MSSID” menu, and you will see the Wireless Multiple BSSID Setup
screen (shown in Figure 4-15). Here you can configure the parameters for the virtual access point.
Figure 4-15
Enable VAP0/VAP1/VAP2/VAP3: Select the checkbox to enable the corresponding VAP
(Virtual Access Point). Only the VPA is enabled, do the following parameters are available.
To Next Page
Loading...
