Error! AutoText entry not defined.
Error! AutoText entry not defined. User Guide
39
Push Button Configuration: Click Start PBC button when using PBC method for QSS
configuration.
1) PBC
If the wireless adapter supports QSS and the Push Button Configuration (PBC) method, you can
add it to the network by PBC with the following two methods.
Method One:
Step 1: Press the QSS button on the front panel of the Router or click Start PBC button in Figure
4-22.
Step 2: Press and hold the QSS button of the adapter directly for 2 or 3 seconds.
Step 3: Wait for a while until the next screen appears. Click Finish to complete the QSS
configuration.
To Next Page
Loading...
