TP-Link TL-SG2216 - Snmp-Rmon History Owner; Snmp-Rmon History Enable

102
Command Mode
Global Configuration Mode
Example
Configure the sample port as 1, and the sample interval as 100 seconds for the
entries 1-3:
TP-LINK(config)# snmp-rmon history sample-cfg 1-3 1 100
snmp-rmon history owner
Description
The snmp-rmon history owner command is used to configure the owner of the
history sample entry. To return to the default configuration, please use no
snmp-rmon history owner command.
Syntax
snmp-rmon history owner {index} [owner]
no snmp-rmon history owner {index}
Parameter
index —— The index number of the sample entry, ranging from 1 to 12. You
can only select one entry for each command.
owner —— The owner of the history sample entry, ranging from 1 to 16
characters. By default, it is minitor.
Command Mode
Global Configuration Mode
Example
Configure the owner of entry 1 as owner1:
TP-LINK(config)# snmp-rmon history owner 1 owner1
snmp-rmon history enable
Description
The snmp-rmon history enable command is used to enable the history sample
entry. To disable the corresponding entry, please use no snmp-rmon history
enable command.
Syntax
snmp-rmon history enable {index}