TP-Link TL-SG2216 - System-Time Dst Predefined

40
Parameter
time —— Set the date and time manually, MM/DD/YYYY-HH:MM:SS
Command Mode
Global Configuration Mode
Example
Configure the system mode as manual, and the time is 12/20/2010 17:30:35
TP-LINK(config)# system-time manual 12/20/2010-17:30:35
system-time dst predefined
Description
The system-time dst predefined command is used to select a daylight saving
time configuration from the predefined mode. The configuration can be used
recurrently. To disable DST function, please use no system-time dst
command.
Syntax
system-time dst predefined {USA | Australia | European | New-Zealand}
no system-time dst
Parameter
USA | Australia | European | New-Zealand —— The mode of daylight saving
time. There are 4 options which are USA, Australia, European and New-Zealand
respectively. The default value is European.
Following ar
e the time ranges of each option:
USA
First Sunday in April, 02:00 ~ Last Sunday in October, 02:00
Australia
First Sunday in October, 02:00 ~ First Sunday in April, 03:00
European
Last Sunday in March, 01:00 ~ Last Sunday in October, 01:00
New-Zealand
First Sunday in October, 02:00 ~ Last Sunday in March, 03:00
Command Mode
Global Configuration Mode