TP-Link TL-SG2216 - Storm-Control Disable Bc-Rate; Storm-Control Disable MC-Rate

56
Command Mode
Interface Configuration Mode（interface ethernet / interface range ethernet）
Example
Enable the Storm Control function for port 5 and specify the bc-rate as 128kbps,
mc-rate as 512kbps and ul-rate as 2Mbps:
TP-LINK(config)# interface ethernet 5
TP-LINK(config-if)# storm-control bc-rate 128k mc-rate 512k ul-rate 2m
storm-control disable bc-rate
Description
The storm-control disable bc-rate command is used to disable the Broadcast
packets control.
Syntax
storm-control disable bc-rate
Command Mode
Interface Configuration Mode（interface ethernet / interface range ethernet）
Example
Disable the Broadcast packets control for port 5:
TP-LINK(config)# interface ethernet 5
TP-LINK(config-if)# storm-control disable bc-rate
storm-control disable mc-rate
Description
The storm-control disable mc-rate command is used to disable the Multicast
packets control.
Syntax
storm-control disable mc-rate
Command Mode
Interface Configuration Mode（interface ethernet / interface range ethernet）
Example
Disable the Multicast packets control for port 5: