58
Example
Configure the ingress-rate as 1Mbps and egress-rate as 10Mbps for port 5:
TP-LINK(config)# interface ethernet 5
TP-LINK(config-if)# port rate-limit ingress 1024 egress 10240
port rate-limit disable ingress
Description
The port rate-limit disable ingress command is used to disable the
ingress-rate limit.
Syntax
port rate-limit disable ingress
Command Mode
Interface Configuration Mode（interface ethernet / interface range ethernet）
Example
Disable the ingress-rate limit for port 5:
TP-LINK(config)# interface ethernet 5
TP-LINK(config-if)# port rate-limit disable ingress
port rate-limit disable egress
Description
The port rate-limit disable egress command is used to disable the egress-rate
limit.
Syntax
port rate-limit disable egress
Command Mode
Interface Configuration Mode（interface ethernet / interface range ethernet）
Example
Disable the egress-rate limit for port 5:
TP-LINK(config)# interface ethernet 5
TP-LINK(config-if)# port rate-limit disable egress
To Next Page
Loading...
