TP-Link TL-SG2216 - User Access-Control Disable; User Access-Control Ip-Based

23
Command Mode
Global Configuration Mode
Example
Modify the password of tplink as newpwd:
TP-LINK(config)# user modify password tplink password newpwd newpwd
user access-control disable
Description
The user access-control disable command is used to cancel the user
access-control.
Syntax
user access-control disable
Command Mode
Global Configuration Mode
Example
Cancel the user access-control:
TP-LINK(config)# user access-control disable
user access-control ip-based
Description
The user access-control ip-based command is used to limit the IP-range of
the users for login. Only the users within the IP-range you set here are allowed
for login.
Syntax
user access-control ip-based ip-addr ip-mask
Parameter
ip-addr / ip-mask ——The source IP address. Only the users within the IP-range
you set here are allowed for login.
Command Mode
Global Configuration Mode