50
Subnet Mask and Default Gateway of the system, whether the DHCP Client
function is enabled or not and some other information.
Syntax
show ip address
Command Mode
Any Configuration Mode
Example
Display the IP Address of the system
TP-LINK# show ip address
show system-time
Description
The show system-time command is used to display the time information of the
switch.
Syntax
show system-time
Command Mode
Any Configuration Mode
Example
Display the time information of the switch
TP-LINK# show system-time
show system-time dst
Description
The show system-time dst command is used to display the DST time
information of the switch.
Syntax
show system-time dst
Command Mode
Any Configuration Mode
Example
Display the DST time information of the switch
To Next Page
Loading...
