TP-Link TL-SG2216 - Show Spanning-Tree Msti Port; Show Spanning-Tree Security Tc-Defend

82
TP-LINK(config)# show spanning-tree msti config 1
show spanning-tree msti port
Description
The show spanning-tree msti port command is used to display the Instance
Port configuration of Spanning Tree.
Syntax
show spanning-tree msti port {id} [port]
Parameter
id —— Instance ID, ranging from 1 to 8.
port —— The port selected to display the configuration. By default, the
configuration of all ports is displayed.
Command Mode
Any Configuration Mode
Example
Display the configuration of port 5 in Instance 1:
TP-LINK(config)# show spanning-tree msti port 1 5
show spanning-tree security tc-defend
Description
The show spanning-tree security tc-defend command is used to display TC
Threshold and TC Protect Cycle of Spanning Tree.
Syntax
show spanning-tree security tc-defend
Command Mode
Any Configuration Mode
Example
Display TC Threshold and TC Protect Cycle of Spanning Tree:
TP-LINK(config)# show spanning-tree security tc-defend