106
Chapter 6
Congure the Router as a Repeater
• Client Name - The name of the DHCP client.
• MAC Address - The MAC address of the DHCP client.
• Assigned IP - The IP address that the router has allocated to the DHCP client.
• Lease Time - The time of the DHCP client leased. After the dynamic IP address has
expired, a new dynamic IP address will be automatically assigned to the user.
You cannot change any of the values on this page. To update this page and show the
current attached devices, click Refresh.
6. 6. System Tools
6. 6. 1. LED Control
The LED control feature allows you to turn off or on the LEDs of the router automatically
when needed.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to System Tools > LED Control.
3. Tick Night Mode and select the LED Off Time from the pull-down lists. Then click
Save.
6. 6. 2. Time Settings
This page allows you to set the time manually or to configure automatic time
synchronization. The Router can automatically update the time from an NTP server via
the internet.
To Next Page
Loading...
