EasyManuals Logo

TP-Link TL-WR841HP Quick Installation Guide

TP-Link TL-WR841HP
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #78 background imageLoading...
Page #78 background image
73
Chapter 5
Congure the Router as an Access Point
5. 1. Status
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Status. You can view the current status information of the router in Access
Point Mode.
Firmware Version - The version information of the router’s firmware.
Hardware Version - The version information of the router’s hardware.
LAN - This field displays the current settings of the LAN, and you can configure them
on the Network > LAN page.
MAC address - The physical address of the router.
IP address - The LAN IP address of the router.
Subnet Mask - The subnet mask associated with the LAN IP address.
Wireless - This field displays the basic information or status of the wireless function,
and you can configure them on the Wireless > Basic Settings page.
Operation Mode - The current wireless working mode in use.
Wireless Radio - Indicates whether the wireless feature is enabled or disabled.

Table of Contents

Other manuals for TP-Link TL-WR841HP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link TL-WR841HP and is the answer not in the manual?

TP-Link TL-WR841HP Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1x
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Number of guest networks (2.4 GHz)1
Wi-Fi bandSingle-band (2.4 GHz)
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 4 (802.11n)
WLAN data transfer rate (max)300 Mbit/s
USB portNo
Ethernet LAN (RJ-45) ports4
Supported network protocolsDynamic IP, Static IP, PPPoE, PPTP, L2TP
NAT functionalityVirtual Server Port Forwarding Port Triggering DMZ UPnP
Security algorithmsWEP, WPA, WPA-Enterprise, WPA2, WPA2-Enterprise
Transmit power30 dBmW
Antennas quantity2
Antenna connector type-
Antenna gain level (max)9 dBi
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 90 %
Product typeTabletop router
Product colorBlack
Cables includedLAN (RJ-45)
WAN connection typeRJ-45
Output current1 A
Output voltage12 V
Power source typeDC
Weight and Dimensions IconWeight and Dimensions
Depth190 mm
Width227.5 mm
Height48.3 mm

Related product manuals