EasyManuals Logo

TP-Link TL-WR841HP Quick Installation Guide

TP-Link TL-WR841HP
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
22
Chapter 4
Configure the Router as a Standard Wireless Router
Note:
Only when you have configured the system time on the System Tools > Time Settings page, will the time-
based connecting functions take effect.
Sometimes the connection cannot be terminated although you have specified the Max Idle Time because
some applications are visiting the internet continually in the background.
If you want to do some advanced configurations, please click Advanced.
MTU Size - The default MTU size is 1480 bytes. It is not recommended that you change
the default MTU size unless required by your ISP.
Service Name/AC Name - The service name and AC (Access Concentrator) name
should not be configured unless you are sure it is necessary for your ISP. In most
cases, leaving these fields blank will work.
ISP Specified IP Address - If your ISP does not automatically assign IP addresses to
the router, please select Use IP address specified by ISP and enter the IP address
provided by your ISP in dotted-decimal notation.
Detect Online Interval - The router will detect Access Concentrator online at every
interval. The default value is 0. You can input the value between 0 and 120. The value
0 means no detect.
Primary DNS/Secondary DNS - If your ISP does not automatically assign DNS
addresses to the router, please select Use the following DNS servers and enter the IP
address in dotted-decimal notation of your ISP’s primary DNS server. If a secondary
DNS server address is available, enter it as well.
BigPond Cable
If your ISP provides BigPond cable connection, please select BigPond Cable.

Table of Contents

Other manuals for TP-Link TL-WR841HP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link TL-WR841HP and is the answer not in the manual?

TP-Link TL-WR841HP Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1x
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Number of guest networks (2.4 GHz)1
Wi-Fi bandSingle-band (2.4 GHz)
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 4 (802.11n)
WLAN data transfer rate (max)300 Mbit/s
USB portNo
Ethernet LAN (RJ-45) ports4
Supported network protocolsDynamic IP, Static IP, PPPoE, PPTP, L2TP
NAT functionalityVirtual Server Port Forwarding Port Triggering DMZ UPnP
Security algorithmsWEP, WPA, WPA-Enterprise, WPA2, WPA2-Enterprise
Transmit power30 dBmW
Antennas quantity2
Antenna connector type-
Antenna gain level (max)9 dBi
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 90 %
Product typeTabletop router
Product colorBlack
Cables includedLAN (RJ-45)
WAN connection typeRJ-45
Output current1 A
Output voltage12 V
Power source typeDC
Weight and Dimensions IconWeight and Dimensions
Depth190 mm
Width227.5 mm
Height48.3 mm

Related product manuals