64
Chapter 4
Configure the Router as a Standard Wireless Router
Tunnel 6to4
• WAN Connection - Display the available WAN connection.
4. Click Save.
4. 15. 3. IPv6 LAN
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to IPv6 > IPv6 LAN.
3. Select the Address Auto-Configuration Type which determines the way how the
router assigns IPv6 address for PCs on the LAN:
• Address Auto-Configuration Type - RADAD (Router Advertisement Daemon)
and DHCPv6 (Dynamic Host Configuration Protocol for IPv6) Server.
• Site Prefix Configuration Type - The type of IPv6 address prefix.
To Next Page
Loading...
