EasyManua.ls Logo

TP-Link TL-WR841HP - Page 125

TP-Link TL-WR841HP
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
120
If the IP address is a valid one, please try the following:
Your computer might not recognize any DNS server addresses. Please manually
configure DNS server.
1 ) Go to DHCP.
2 ) Enter 8.8.8.8 as Primary DNS, and click Save.
Tips: 8.8.8.8 is a safe and public DNS server operated by Google.
Restart the modem and the router.
1 ) Power off your modem and the router, and leave them off for 1 minute.
2 ) Power on your modem first, and wait about 2 minutes.
3 ) Power on the router, and wait another 1 or 2 minutes and check the internet
access.
Reset the router to its factory default settings and reconfigure the router.
Upgrade the firmware of the router.
Check the TCP/IP settings on the particular device if all other devices can get internet
from the router.
If the IP address is 0.0.0.0, please try the following:
Make sure the physical connection between the router and the modem is established.
Clone the MAC address of your computer.
1 ) Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2 ) Go to Network > MAC Clone, select Clone MAC Address and click Save.

Table of Contents

Other manuals for TP-Link TL-WR841HP

Related product manuals