EasyManuals Logo

TP-Link TL-WR841HP Quick Installation Guide

TP-Link TL-WR841HP
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #82 background imageLoading...
Page #82 background image
77
Chapter 5
Congure the Router as an Access Point
5. 4. 2. WPS
WPS (Wi-Fi Protected Setup) can help you to quickly and securely connect to a wireless
network. This section will guide you to add a new wireless device to your router’s
network quickly via WPS.
Note:
The WPS function cannot be performed if the wireless function of the router is disabled. Please make sure the wireless
function is enabled before configuration.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to WPS.
3. Follow one of the following three methods to connect your client device to the
router’s Wi-Fi network.
Method ONE: Press the WPS Button on Your Client Device
1. Keep the WPS Status as Enabled and click Add Device.
2. Select Press the WPS button of the new device in two minutes and click Connect.
3. Within two minutes, press the WPS button on your client device.
4. A success message will appear on the WPS page if the client device has been
successfully added to the router’s network.
Method TWO: Enter the Client’s PIN
1. Keep the WPS Status as Enabled and click Add Device.

Table of Contents

Other manuals for TP-Link TL-WR841HP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link TL-WR841HP and is the answer not in the manual?

TP-Link TL-WR841HP Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1x
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Number of guest networks (2.4 GHz)1
Wi-Fi bandSingle-band (2.4 GHz)
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 4 (802.11n)
WLAN data transfer rate (max)300 Mbit/s
USB portNo
Ethernet LAN (RJ-45) ports4
Supported network protocolsDynamic IP, Static IP, PPPoE, PPTP, L2TP
NAT functionalityVirtual Server Port Forwarding Port Triggering DMZ UPnP
Security algorithmsWEP, WPA, WPA-Enterprise, WPA2, WPA2-Enterprise
Transmit power30 dBmW
Antennas quantity2
Antenna connector type-
Antenna gain level (max)9 dBi
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 90 %
Product typeTabletop router
Product colorBlack
Cables includedLAN (RJ-45)
WAN connection typeRJ-45
Output current1 A
Output voltage12 V
Power source typeDC
Weight and Dimensions IconWeight and Dimensions
Depth190 mm
Width227.5 mm
Height48.3 mm

Related product manuals