95
Chapter 5
Congure the Router in WISP Mode
5. 7. 2. Access Control
Access Control is used to block or allow specific client devices to access your network
(via wired or wireless) based on a list of blocked devices (Blacklist) or a list of allowed
devices (Whitelist).
I want to:
Block or allow specific client devices to access my network (via wired or wireless).
How can I do that?
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced > Security > Access Control:
3. Select the access mode to either block (recommended) or allow the device(s) in the
list.
To block specific device(s):
1 ) Select Blacklist and click SAVE .
2 ) Click Add and select devices you want to be blocked. You can see the devices
have been added to the blacklist.
To allow specific device(s):
1 ) Select Whitelist and click SAVE.
To Next Page
Loading...
