55
Chapter 4
Configure the Router in Wireless Router Mode
• To back up configuration settings:
Click BACK UP to save a copy of the current settings in your local computer. A “.bin“ file
of the current settings will be stored in your computer.
• To restore configuration settings:
1. Click BROWSE to locate the backup configuration file stored in your computer, and
click RESTORE.
2. Wait a few minutes for the restoring and rebooting.
• To reset the router to factory default settings:
1. Click FACTORY RESTORE to reset the router.
2. Wait a few minutes for the restoring and rebooting.
Note:
• During the resetting process, do not turn off or reset the router.
• We strongly recommend you back up the current configuration settings before resetting the router.
4. 9. 3. Change Password
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced > System > Administration, and focus on the Change Password
section.
To Next Page
Loading...
