EasyManua.ls Logo

TP-Link TL-WR844N

TP-Link TL-WR844N
147 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
76
Chapter 5
Congure the Router in WISP Mode
To check the DHCP client list:
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced > Network > DHCP Server and locate the DHCP Client List section.
You can see the device information of the list.
3. Click Refresh to see the current attached devices.
5. 2. 6. Dynamic DNS
The router offers the DDNS (Dynamic Domain Name System) feature, which allows the
hosting of a website, FTP server, or e-mail server with a fixed domain name (named
by yourself) and a dynamic IP address. Thus your friends can connect to your server
by entering your domain name no matter what your IP address is. Before using this
feature, you need to sign up for DDNS service providers such as www.comexe.cn, www.
dyndns.org, or www.noip.com. The Dynamic DNS client service provider will give you a
password or key.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced > Network > Dynamic DNS.
3. Select the DDNS Service Provider: NO-IP or DynDNS. If you don’t have a DDNS
account, you have to register first by clicking Register Now.

Table of Contents

Related product manuals