119
Chapter 6
Congure the Router in Access Point Mode
6. 7. Time Settings
This page allows you to set the time manually or to configure automatic time
synchronization. The router can automatically update the time from an NTP server via
the internet.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to System > Time.
• To set System Time:
1. Select the way in which the router gets its time: Get from Internet, Get from Managing
Device, Manually.
2. Select your local Time Zone.
3. Enter the address or domain of the NTP Server 1 or NTP Server 2.
4. Click SAVE .
• To set up Daylight Saving Time:
1. Select Enable Daylight Saving.
To Next Page
Loading...
