106
Chapter 5
Congure the Router in WISP Mode
• Allow a specific device to manage the router remotely:
1. Tick the Enable checkbox of Remote Management.
2. Keep the HTTP port as default setting (recommended) or enter a value between 1024
and 65535.
3. Select Specified Device for Remote Managers.
4. In the Only this IP Address field, enter the IP address of the remote device to manage
the router.
5. Click SAVE .
Devices using this WAN IP can manage the router by logging in to http://Router’s WAN
IP:port number (such as http://113.116.60.229:1024).
Tips: The router’s WAN IP is usually a dynamic IP. Please refer to Dynamic DNS if you want to log in to the router
through a domain name.
5. 9. 6. System Log
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced > System > System Log, and you can view the logs of the router.
To Next Page
Loading...
