EasyManua.ls Logo

TP-Link TL-WR844N

TP-Link TL-WR844N
147 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
71
Chapter 5
Congure the Router in WISP Mode
default value is 15 minutes. If you want the internet connection remains active
all the time, enter 0 (zero).
Note:
Sometimes the connection cannot be terminated although you have specified the Max Idle Time because some
applications are visiting the internet continually in the background.
L2TP
If your ISP provides L2TP connection, please select L2TP.
Username/Password - Enter the username and password provided by your ISP. These
fields are case-sensitive.
VPN Server IP/ Domain Name - Enter the VPN server’s IP address or domain name
provided by your ISP.
MTU Size - The default MTU size is “1460” bytes, which is usually fine. It is not
recommended that you change the default MTU Size unless required by your ISP.
Connection Mode
Auto - In this mode, the internet connection reconnects automatically any it
gets disconnected.
On Demand - In this mode, the internet connection will be terminated
automatically after a specified inactivity period (Max Idle Time) and be re-
established when you attempt to access the internet again.

Table of Contents

Related product manuals